January 17, 2026
Description
I didn't like "over-templatized" trays, and dual trays are too much hassle.
So I made my own simple "low profile full-sized" tray.
Feel free to remix on Tinkercad - Partition the trays as you see fit.
Just join the left and right trays together with 3 X M3*4 screws.
Front plates are optional, used to hide the joint. Just superglue the front plates on.
These are my AliExpress affiliate links. They don't cost more, but I do make a small commission - That will help offset the costs of my future projects. 👍
(3X) M3*4 Screws
0.2~0.3mm layer height.
At least 3 walls & 3 shell layers.
20% gyroid infill.
Can be printed without supports. Only the right plate requires a little bit of support.
License:
Creative Commons — Attribution — Noncommercial
7
Red Dot Geek
