June 13, 2026
Description
Adapter for 200 mm wheel with 360° steering for Bugaboo Chameleon and similar strollers. Requires diassembly of original part, new (used) 200 mm wheel and two M6x80 bolts with thread lock nuts.
There's a reduction tube for 6 mm bolt to fit in 8 mm hole. Axis tube is dependent on the wheel used so change it in .scad or create elsewhere.
Wheel can touch the stroller's basket so you need spacers to shift the basket up a little.
Print in PETG or similar. PLA is not flexible enough and may break after a while. Smaller parts can be printed in PC, ABS, ASA. Spacer and reduction can be printed in vase mode.
License:
Creative Commons — Attribution — Share Alike
SE
