March 23, 2022
Description
California compliant stock and forward grip blocks to make a P-90 compliant. The one in the pictures is a Ruger 10/22 in a High Tower Armory 10/22 P-90 stock kit. It should fit on an actual FN P90/PS90.
(rimfires aren't considered an AW in CA so not required, just for demonstration purposes)
The trigger blocks don't seem to stay on properly, so I'd add some Tesa tape or something to stabilize it a bit. Feel free to improve upon it.
Print the left and right side of the thumb-hole stock blocks, and two copies of the trigger blocks.
I'm using M-LOK screws
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
1mm
Infill:
doesn't matter
Filament: Duramic 3D PLA+ Black
Notes:
Setting don't mater too much. The ones on my pictures were printed on their sides. You can print it vertically as that would make them stronger but they'll look a bit weird since they won't sit flush in the cavity. Flat for style, Vertical for strength.
Your choice. :)Thanks to James Robbins for the paintball P90 model in grabCAD
License:
Creative Commons — Attribution
9
EHZ_115
