January 4, 2026
Description
Wall mount holder for a power strip, allowing clean and secure installation on the wall.
Simple, modular design, easy to print and assemble.
Material: PETG (recommended)
Layer height: 0.2 mm
Nozzle: 0.4 mm
Infill: 20–30%
Supports: not required
The model was printed in PETG. Other materials can be used, but PETG offers better heat resistance and mechanical strength.
After printing, the holder can be attached to the wall using screws.
License:
Creative Commons — Attribution — NoDerivatives
Mario L
