Remixed Raspberry Pi 5 Waveshare POE Hat Enclosure for wall mounting

I wanted to wall mount the Raspberry Pi 5 with Waveshare POE hat. I covered the GPIO pins as they weren't going to be in use and added some mounting holes for 5g screws. Longer M2.5 bolts will be required for the top piece - I used 20mm ones which I had on hand. The back bolts are flush so that it'll sit properly against the wall and the front ones were meant to be flush, but I clearly slightly misjudged and they are very slightly proud. Not enough of an issue that I'm going to adjust the design and reprint, however!

Thanks to the original designer for the model to remix.