Bambu X1, H2, and P2 Lid Lifts

I switch between PLA and other filaments frequently, but this normally takes too much time when propping open the lid to increase airflow for PLA prints. Other models focus on semi-permanently increasing airflow, but are time-consuming to take on and off.  This model is intended for easy installation and removal from all Bambu enclosed printers. I've tested this model extensively, and the glass lid easily supports the weight of a fully-loaded AMS when propped open.

Print at least two lifts for best support (model file includes two lifts).

Features

• Lifts glass lid by ~57 mm for increased airflow

• Lift includes handle for easy repositioning

• Rounded foot for maximum compatibility

• Fast print! Between 45-90 minutes,  depending on your printer

Recommended Settings

• Layer Height: 0.28 mm

• Walls: 3

• Infill: 15%

• Material: PETG, ABS, PLA+ (or any material that can withstand 40-50C without deforming)

• Supports: No

• Change Orientation: No

• Brim: No