March 23, 2022
Description
I had the problem that my dryboxes always fallen over when having the spool lying in the box lid while threading filament. You may have the stand fixed with 2 M3x8 screws or not. don't tighten the screws to much, because the PTFE adapter will brake. I drilled a small Ø 3 mm hole with 1mm depth into the adapter.
My PTFE connectors got a big enough flange to hold them in place so the screws are a bit overkill.
My print was made with PLA and had a perfect fit on my PLA adapter, maybe a print with PETG will end in a more loosy fitting. As always I used a thread cutter before inserting the screws.
The gcode is made for 5 pieces for all my dryboxes and has painted support only for the screw extensions.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
steffanders
