January 29, 2026
Description
I used BHCS M3x8 bolts to affix the card to the print, and made the existing holes smaller so that the M3 bolts thread into them. Using BHCS bolts meant that the bracket for the top case retention screw has to be bent a little; this may not be necessary if you use wafer head bolts but I didn't have any handy.
I used this card: https://core-electronics.com.au/m2-ae-key-2-5g-ethernet-network-card-lattepanda-dfrobot.html
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
angrygriffin
