Dragon-Themed Decorative Wand – One-Piece and Split 3MF Model Versions

Short Description

This model represents a decorative wand with dragon-themed sculpted geometry and a continuous solid form.
Two 3MF files are included: a single-piece version with generic print settings and a second version that is oriented and split with optimized print settings.

Files Included

• One-piece model (3MF)
  Single solid model using generic print settings.

• Split and oriented model (3MF)
  Model divided and pre-oriented, with optimized print settings applied.

Print Parameters (Suggested)

The following print settings are provided as a general recommendation and are not mandatory:

• Material: PLA

• Layer height: 0.15 mm

• Infill: 15 %

• A physical print test is shown using Prusa Woodfill PLA.

Usage Notes

• The model is a static decorative object.

• No moving parts are present.

• No assembly hardware is specified.

Limitations / Notes

• The model geometry was generated using AI based on an AI-generated reference image.

• The design follows the generated geometry without manual functional optimization.

Disclaimer

This model and its description were generated using AI.