Drill bit holder

 The drill bit holder is equipped with a closing cap, but it can also hold the drill bits in place with a simple elastic band threaded through the closing channel of the cap. You can see in the photo that they are also held in place this way. It is a useful model for me. I don't know how "original" it is.                                           The sizes are for diameters of 10, 8, 6, 5, 4, 3, 2.5—the 2 mm one tends to slip out, but thickened with tape it can be kept in the holder without losing it. Length 125 mm.                                                                                 To secure the cover when closing, the channel on the back at the end closest to the 10 mm slot needs to be cleaned a little to allow the corner of the cover that provides the elastic closure to pass through. You will understand easily when you assemble the cover; do not use unnecessary force.

PS: I took a look at the website and didn't see a model that uses the hexagonal shape for guiding and holding drill bits. I'm surprised to see that this idea is "original." The advantage of this model is that it can be used in portable toolboxes without the drill bits scattering around the toolbox.