March 24, 2022
Description
This backplane ist meant to replace the original one of the BigTreeTech SmartFlamentSensor. You only need to use 4 of the 6 screws to mount the sensor in place.
It is designed to be mounted on the left side of an extrusion, with the inlet looking 45° upward. If you want to mount it on the right side, then just mirror it in the slicer.
For mounting you only need one M5 or M6x12mm screw and headnut. The nose will prevent it from moving around.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Spedi
