Creality K2 Plus Heatbreak Duct

This duct is an attempt to better guide the air along the heatbreak. It will help to cool down the heatbreak by a homeopathic dose of °C. Because i always want to see the extruder gear moving, i never use the original cover. Even if it fits, i wouldn't use both.

Printing

• walls: 1

• bottom shell layers: 4

• layer height: 0.16mm

• infill: 0%

• support: yes (optionally enable: Ironing Support Interface)

• minimum feature size: 80

Screws

• 2x M2x10

Material

PETG is recommended over PLA. PLA Its is near its limit and will look like so, but stay in that shape:

Version 2.0 with added L-profile to prevent this bending should fix it for PLA.

See also FreeCad project file on GitHub: duct.FCStd.