PET bottle tripod

This is a tripod with bottles as legs. Use bottles in height you prefere (bottles shoud be same height).  You can fill the bottle with whatever you have to make it heavier to withstand e.g. wind and other forces.

I added 2 versions, one for bottles thread mount and other for bottles just pushed in. Pictures here show the threaded version.  

Print instructions

• 0.2mm layer height
• 10% grid infill
• I used PLA and it looks like it does the job

Notes on how to mount your equipment

For mounting a camera you need a ¼" adapter shown in the picture to mount it onto this tripod. I added a printable version. For that you have to print the rod and 2 times the nut (see pic for reference). It works ok, but it is still plastic and can break - keep that in mind (or buy those cheap metal cam adapters). 
Another possibility is to use a ¼" screw with compatible threads and screw it from the bottom to the top. (I do not live in inchy land, so those hardware is to expensive and exotic for me)

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.