LSI 9300-16i 92x92mm Fan Mount

I found trying to install a fan was a bit too tedious especially when the wiring can get jammed so easily between the fan's frame and the shroud. So the fan's mounting points were moved from the front to the back and the shroud that covers the fan was also removed to be compatible with 15mm and 25mm thick fans.

The magnetic version requires 4x 6 x 3mm magnets. Simply...

1. Insert the magnets into the 4 corners. it should be a snug fit with no glue required. Make sure that all magnets have the same polarity facing out.

2. Screw in the mounting screws into the back side of the fan's frame.

3. Attach the fan to the frame by lining up the screws to the magnets and it should hold.