Virtual Boy Tripod Mount - Kit

If you don't have a printer check out my stores, I sell some of my designs printed with everything you'll need:
etsy -
http://www.16bitgamestore.etsy.com/

eBay -
https://www.ebay.ca/usr/16bitvideogamestore

To assemble this Kit, you will need x3 10-32 ½" Screw and Nut, x1 10-32 1" Screw, and a 10-32 Wing Nut, x1 ¼" Nut, and (Optional) #16 Rubber Band.

Screw the 1" Screw into Adapter, and place the Plug behind it. Next Hammer in the 10-32 Nuts into their slots, and place the ¼" nut into the mount. Afterwords thread the rubber band in the guide with a sim card removal tool, or a thin piece of metal. Finally screw Mount into the adapter with the 10-32 screws, and the A Side, and place the B Side in with the Wing Nut behind it.