Open Universal Holster V2 (Novritsch)

Buying different holsters for all of your pistols can be costly and in most cases, you won’t even be able to holster your pistols with your favorite accessories on them. This holster is to solve that problem. Our system allows you to use the same holster for multiple guns, so if you rock with us, this will be the last holster you’ll have to buy / print! For securing this holster on your battle belt, the best option will be the Molle Mount Gen2. Now that the holster speaks for itself, the only thing left to do is to select the right adapter for your pistol: Releasing more adapters soon!

Adapter one: 

Used pla and petg, enjoy! 

Recommend printing in set orientation along with some supports. 

Additional Parts

• 4x M3 10mm

• 1x M3 20mm

• 1x M3 nut

• 2x M3 washer

• 1x M6 15mm

• spring from an aep mag, pen or similar 

I suggest hot-glue and some Loctite for assembly

Instructions VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV

Glue the two small springs on this part. They need to align with the edge otherwise the holster might not work properly. 

Now glue the two larger springs on this part. The springs need to align with the inside edge.

Use the 20mm screw, the washers, nut and som Loctite to put these parts together. The screw should not sit to tight and the direction of the screw is important.

Put the parts in the bottom-shell.

Fix the bottom and upper shell wit the 10mm screws.

Glue the rotary and the button in their provided place.

Finished!!