Pipette stand - round

Manufacturing instructions

• Material: PETG/PP

• 3D Printer: Any FDM 3D printer with the minimal build plate size 200x200mm

• Slicer settings: 4 perimeters to increase strength, support recommended– for stability

• Post processing instructions: Remove supports, clean the parts from stringing if needed, check if the parts slides into each other as per assembly instructions.

Assembling instructions

1. Slide the legs in the stand (it is a tight fit)

2. Insert the top part of the holder on the stand.

QC procedures

1. Visual inspection:

   1. Ensure that the surface is smooth, especially parts which were supported by supports.

   2. Sometimes the corners detach during the printing – check if the legs are not distorted

2. Tolerance inspection:

   1. Check if the legs hold tight in the stand and do not detach when lifted

   2. The top part should rotate freely, but when hold, the stand should not fall down.

   3. Check if the various types of pipettes hold firmly in the stand. You should be able to remove it using one hand easily.