January 13, 2026
Description
The most common failure of the front windshield washer nozzles is the deterioration of rubber grommets, which hold the nozzles in place and also provide the final bits of hose that route washer fluid to the nozzles.
This model holds the nozzle in place and allows you to pass the necessary nozzle hose to it. The new part features a hole for routing the replacement nozzle hose; the hose itself is not included in the new model (STL).
A new part can be purchased from www.ecstuning.com, or you can search for the part number to find another source (ES#413592).
Filament: PTU
Infill: 15%
Support: No
Brim: No
The hole size for the washer hose is 7mm, because the standard OD of a washer hose is 6.5mm.
Image of the original part:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
mfetting
