Samsung S10 dock for Ford Focus 2017 centre console

When getting into my car, I didn't want to spend the time sitting down and searching for the USB cable, and plugging it in, then having my phone flop around whilst driving so I can use Android Auto. I designed this so I can easily just slot my phone in and it plugs directly into my car whilst holding it securely.

I designed this and have been using it for over 2 years, and even in PLA, in the temperatures we've been having, it's not had a single issue!

There are three parts, the Holder, the plug, and the mount. 

The main and only essential part is the holder, which is basically the entire item. I've just got that printed and fitted it into the slot using a couple of strips of sticky back velcro tape (a couple of strips on this unit and on the car slot).

The other plug is a small simple part and is designed to fill in the hole that is required to pass the back end of the USB cable through when fitting the USB cable into the mounting slot.

The mount is a piece I designed so this could just slot into the car, but I never actually used that as I fitted it with tape so not sure how well that part fits (as I say, the rest has been rock solid and great for over 2 years).

This is designed for use with this UGreen USB cable, but any cable where the USB C end is the same dimensions will work just as well. I just have the other end of the cable plugged in to the other centre console section with the lid.

This has been designed to still allow full use of the centre console coffee cup holder, in either the open or closed position, so you lose no functionality by using this.