January 11, 2026
Description
A holder for the two NACS adapters (CCS & J1772) that are delivered with the 2025+ Hyundai Ioniq 5. Fits underneath the storage area in the console. My car has the sliding console, I am unsure if this will also fit on the fixed console. I attached this with double sided tape and it feels plenty sturdy.
You should print this with a heat resistant filament like PETG as the summer heat will deform this.
Print settings I used:
0.15mm balanced profile
4 perimeters
Gyroid infill
Printed with Overture PETG.
For dust covers try these out:
NACS (specifically, the no retention file)
J1772
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
JeffWDH
