EGO 56V Battery Mounting Bracket - Proslat

Unsatisfied with the limitations and individual costs of Proslat mounting hooks, I reverse-engineered the EGO battery to create a secure, seamless holder designed specifically for Proslat walls.

Two variants are provided:

• Single-body (one-piece) print – Printed as a single, integrated part that requires no additional hardware (i.e., no fasteners). This option will require some level of print supports.

• Multi-body (multi-piece) print – Consists of multiple parts that assemble using M3 countersunk screws and heat-set inserts. This is my recommended and preferred option. While it requires slightly more time, material, and additional equipment, it results in a stronger and more robust final assembly.

The instructions below outline the required steps for the multi-body version.

Instructions (Multi-body):

1. Insert three (3) heat-set inserts into the chamfered side of each wing assembly.

   • Each holder uses two wings, for a total of six heat-set inserts.

2. Using M3 × 12 mm countersunk screws, attach the wings to the main body of the holder.

   • Ensure the chamfers on the wings face outward, toward the edges of the main body. This orientation helps the battery align more easily during initial engagement.

Materials (Multi-body):

• Fasteners: M3 x 12 mm countersink (qty 6)

• M3 heatserts (qty 6)