Tool Box Parametric - Prusa Mini Printable Remix

This is a remix of the Tool Box Parametric by Yanev, scaled and modified to be printed on a Prusa Mini. The key changes are:

• Scaled down to fit on Prusa Mini printbed
• All hardware mounts modified so that M3 sized bolts can still be used despite the scaling
• 1.75mm filament can still be used (if you want) for the box gasket

6 M3 x 25 bolts are required for the hinges and latches. Increase the size to M3 x 28 if you'd like to add a nut to the end of each, but the holes are sized to let the bolts screw into the material and hold firmly without nuts.

A full set of internal dividers, as shown in the pictures, can be found here.

Print settings used in sample photos
Prusament Mango Yellow and Galaxy Black PETG
100% rectilinear infill
0.15mm layer height
No supports

PLA, lower infill and higher layer heights should work fine too.

Hope this is useful for the Prusa Mini owners out there.