VW Eurovan ScanGuage II Mount

ScanGaugeII can help you monitor your VW Eurovan/Rialta most vital systems and provide the kind of real-time information you’ve been missing. The mount is positioned on the dash, utilizing the small well and cigarette lighter space.  

I used the ScanGaugeII mounting C (tilt & angle) for my rialta.

2x 3mm Brass Insert
2x 10mm Hex Head Screw

The case that holds the scanguage snaps onto the base that is screwed into the dash mount.  You will need to remove the trim, remove the storage compartment above/right of the ashtray, and snap in the dash mount, reattach the trim, and screw the base to the dash mount (the trim basically keeps it attached to the dash).  Run the cable of the OBDII to the left of the steering column (the bottom cover below the steering wheel is held in be three screws from the bottom) and route it to the dash mount.

Filament: ABS/ASA
Infill: 25%
Supports: No
Brim: No