November 7, 2023
Description
Description:
A small enclosure for a Senseair S8 CO2 sensor and a Wemos D1 Mini ESP board. No supports and no fasteners needed. Everything just slides into place.
Tips:
Make sure the wiring connects from the wifi-side on the D1, and the plastic side on the Senseair, otherwise things may not fit.
I printed this in PLA using a 0.4mm nozzle at .15mm layer height.
.STEP and .f3d files are included, feel free to improve/adapt and share alike!
Software:
I'm using this with Home Assistant using the excellent ESPHome project.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
Citruspers
