Cotton Carrier Twist and Lock Camera Mounts and Hub

Webbing-mounted Clips

The two webbing-mounted clips are going to be fairly niche so most likely aren't going to be useful for most people, but they serve as a example of ways you can mount them to a bag/webbing. Both of these have a slot through the back so that you can feed the webbing through the mount. And they also both have slots for zip ties to hold it to webbing in the case it un-weaves itself. Also I'd still recommend wearing a neck strap as risking the life of an expensive camera on a 3d printed mount isn't the best idea.

Standalone Clips

The standalone clips are just models of the clips on their own, to make it easy to add them into other mounting methods.

Hubs

I've not tested the hubs but I've just cloned the one I have access to, so both are based on the non-slot design, I've made the slot as close to the one on their website to solve the battery door blocking problem.

Printing

I've printed both webbing clips in PLA, to test and they feel pretty solid. Although they have now been sent off to be printed in MJF PA12 Nylon, both were less than £10 posted, so fairly affordable. I think the real ones are Nylon PA6.