January 13, 2026
Description
Charger stand for Xiaomi watch 2 and watch 2 pro
I created a stand for the charger. I printed it from PLA .
Print settings:
- 4 perimeters
-12% infill
- 32g of material
- 1h 45m of printing
I used supports only to support the hole for the charger.
I also taped the charger with double-sided tape, since there is a tolerance for printing and so that I could insert the charger there because of the cable. I glued the cable into the groove with superglue to hold it firmly.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
ONECL
