soap dispenser/pump & sponge dripping rack

works with soap dispensers of up to 75 mm diameter and sponges with roughly 70 x 45 mm.

i would suggest to manually place 2 support enforcers in the square corners where the extruded overhangs aren't going in a straight line but around the corner (see last image).

also needed to print about 4x of the feet i uploaded. maybe 3 would work, but rather use 4 as it's more stable.
just glue them somewhere in to the slots with some superglue.

it's not parametric or clean or anything but i threw in the step file so maybe you can adjust some measurements without messing the model up too much lol