PiCamMCR - Arducam/Waveshare/Raspberry Pi camera (with lens) Case

Rapsberry Pi picamera micro case.

Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. 

The files:

1. ✅ Front 

2. ✅ Gasket

3. ✅ Rear

4. ❌ No lens gasket - Assuming folks have the ability to design their own (if not - ask me)

To mount the camera you will need to source and shape some 3mm metal rod. However, i used mudguard stays from my stash of parts (sks bicycle mudguard stays - avaialable on amazon etc). 

Selection of 3mm rods - Brass looks great on the black prints: https://www.amazon.co.uk/s?k=3mm+rod&crid=HI0T2ZIEJ9FH&sprefix=3mm+rod%2Caps%2C106&ref=nb_sb_noss_1

You can watch the camera @ https://www.youtube.com/@PicamMCR where i output the live testing of the Picameras that i am playing with at the time. There is also a software development going on behind the scenes. The repository is at https://github.com/teqherself feel free to tinker, these codes are a little old now as i have moved the project along somewhat. The posted codes are just early dev files and will/may crash. The repository will be tidied up soon as i have my scripts ready for proper release.