Snapmaker U1 Anti Vibration Feet

Snapmaker U1 Antivibration Feet,

i had these kind of feet already in use for my Bambu Lab,
but no one works well for my Snapmaker U1.

I designed it like the "original" ones, but with an inner core, no hole on ground and mount for Snapmaker.
So I can adjust the strengt of the compression of the feet out of the box a bit better.

I printed with TPU95A.
Front 2 Walls no infill on core.
Back (is bit heavier) 2 Walls + 5% infill.


Also suggest to added a modifier on top to increase infill for more stapility on mounting.
Is designes as loose fit, i used adhensive tape to mount it, you may need to resize to 101% for a tight fit.

Depends a lot how much spools you have attached (+4kg load)


update:
I think i will reprint it with more infill again - so with 4kg extra load, it will be better.
You may need to test what will fit best for you.

I changed from 95A to another 95A TPU vendor for color,
and got other compressions...

You might need to test it a bit more as expected for a perfect result.