Designer wall mount for storing and displaying skis and ski poles with logo/nameplate

Designer wall mount hanger for storing/displaying alpine skis and ski poles

• with a locking plate (click in on the hanger) to secure the skis and poles

• and a logo/name plate (click in on the locking plate) 

mountable with two 5x120mm countersunk screws, which are also stabilizing the hanger.

easy to print, no supports needed

A matching model for cross-country skis and poles is available here.

There is a blanc name plate where you can add a text or a logo with the slicer and preconfigured logo plates for Fischer, Head, Kästle, Rossignol, Salomon

Ski and Pole dimensions: 

• Ski pair maximum thickness 14mm

• Ski width on the hanging point maximum 120mm

• Ski pole diameter maximum 18mm

Printing instructions

• for best results do not change the orientation of the parts

• PETG recommended (PLA may work also, but is more brittle)

• 0.4 nozzle

• 0.2mm Structural

• 3 Perimeters

• 15% infill Gyroid

• no supports needed

Hanger usage:

• connect both skis using the ski brakes mounted on the bindings.

• place the ski pair in the holder with the narrowest part under the ski tips.

• place the ski poles into the recesses left and right at the holder

• push the locking plate on the holder

• add a name/logo plate to the locking plate if desired