AgOpenGPS AIO Standard v4.5 Enclosure

Instead of the expensive Deutsch plug, I opted for an inexpensive Aliexpress plug that can be screwed together and also establishes a secure connection.

Printed out of PETG/PETG-CF 

Used Components:

• 2x9pin Terminal block connector (https://de.aliexpress.com/item/1005008350198388.html)

• 2xM4x30mm Screws 

• 2xM4 hex nuts (must be inserted while printing with pause)

• 4xM3x10mm (for connector)

• 4xM3 hex nuts (for connector)

The UM982 I used: (~95€ https://de.aliexpress.com/item/1005009880145217.html)

This design is not 100% waterproof/dustproof, as it has openings for Ethernet and antennas.

If you have any further questions, just write a comment!