vacuum cleaner parking lot

I use my vacuum cleaner in my workshop. I usually use the vacuum cleaner without the tube, just with the nozzle on the hose. The device is always plugged in and ready to use, so I can quickly vacuum up a few chips or similar debris. However, I always found it annoying that the hose was too unwieldy and difficult to roll up each time.

To solve this problem, I attached a very simple but ingeniously practical “parking space” for the suction nozzle (without the hose) to the wall.

Now I can pick up the vacuum cleaner in no time at all and put it back after use. And there is also a hook for the excess cable.

Suitable for all vacuum cleaner hose connector with an inner diameter of 30 mm.