Cycplus R200 Tennisball Rocker Feet

You can use the 1 or 2 ball versions depending on your personal preferences and weight. 

This special design uses the original feet as screws to secure the printed feet, so except for 4 to 8 tennis balls no additinal parts are needed. Also you can use the original feet to adjust the possible amount of movement.

Printing recommondations:

• PETG

• Layerheight: 0,25mm

• 5 walls

• Infill: min. 15%

• no supports required

Installation:

• Remove the original plastic endplugs and screw-on feet from the frame.

• Snap in 1 or 2 tennisballs

• Slide the printed feed onto the frame

• Secure the feet with the original screw-on feet