February 8, 2026
Description
20260208 Layer with texture has been added , you can glue it on top
Hello, A simple protective cover designed for 60% gaming keyboards. It should also fit most 60% clone keyboards with similar dimensions. The outer frame is printed in red PLA. Inside the frame, I added a piece of plexiglass that I cut from a scrap sheet I found in my garage. I used cyanoacrylate glue to bond the plexiglass to the printed frame. Because the glue left white marks on the plexiglass, I created an additional small frame to attach underneath, which hides the glue and gives the cover a cleaner look.
Category: Video Games
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Jonweb
