Heavy-Duty Pipe Clips (M4) | 16-50mm Set

Need a stronger hold? This "Heavy-Duty" series is an upgraded version of my standard pipe clips.

What's New?

• M4 Mounting: The central screw hole has been enlarged to accommodate stronger M4 screws or bolts, allowing for more secure fastening to walls or frames.

• Reinforced Design: The walls of the clip and the base are significantly thicker and beefier. This provides a much stiffer snap-fit and is capable of supporting heavier pipes without sagging or breaking.

The Set Includes 9 Sizes:

• 16mm

• 18mm

• 20mm

• 22mm

• 25mm

• 28mm

• 32mm

• 40mm

• 50mm

Printing Instructions:

• Orientation: Print standing upright on the flat base.

• Material: Because these are thicker and stiffer, PETG or ABS/ASA is highly recommended to allow enough flex for the pipe to snap in without cracking the arms. PLA is okay only if you don't plan on removing the pipe frequently.

• Walls/Perimeters: Use 3-4 perimeters for maximum strength.