Pipes Cap - Parametric

Plug for steel pipes, plastic pipes, etc. Modification by automatically changing parameters in F360. 

The plug has been designed for steel structures, but it can also be used for any other purpose at home or in the workshop. The plug is automatically modified to the required size using the Parameter Change tab - ‘Change’. Five parameters can be modified - three main:

• the height of the plug to be placed in the pipe

• the width to be covered - the circumference of the pipe

• the internal width of the pipe so that it fits elegantly

In addition two specific, you can also specify the thickness of the inner wall to be placed in the pipe (e.g. to increase strength) and the height of the cap so that it is as close as possible to the profile.