January 19, 2026
Description
These Glock compatible covers can prevent pocket lint, dust or rain from entering your conceal carry spare magazines by snugly slipping over your unused magazines and providing a reasonable cap seal for the magazine till next time you need it! Keep your carry magazines reliable by keeping gunk out!
Magazine covers are designed to be lightly snug, enough to where magazines wont just slip out if you are handling them, but at the same time, being easy to slide a new magazine into the protective cover or pull a mag out of the cover effortlessly. You can carry in your pants pocket, in a backpack, on a belt out in the rain and not have to worry about your magazines getting gunked up with rain or poket lint making them unreliable at the time when you need them the most!
I ran test prints on a Bambu Labs A1 Mini, 0.2mm Nozzle, 0.4mm Nozzle, and 0.8mm Nozzle all worked just fine, no issues. I just recommend running the print with the cover open side up, "Support Enabled - Tree - 45degrees" Thats all.
Some Filing will likely be needed to smooth the top rounded edge off a bit where the supports will connect. A fine file or a fingernail file will do the job just fine. Just to make sure the covers cant snag anything and you are good to go!
License:
Creative Commons — Attribution — Noncommercial
11