USB-C cable mount for Prusa MINI/MINI+

I designed a simple mount for my USB-A to USB-C cable that was just awkwardly lying around on the table.

I am using cables from a brand called “Yootech” (Amazon Link) but it's just a generic cable with plenty of the same design across the internet.

You will also need:

• 2x T-Nuts, I used these uploaded by 3Dprintedgr
• 2x M3 Nuts
• 2x M3x8 bolts for screwing in the T-Nuts
• 2x M3x10 bolts for the cable

“Assambly:”

1. Simply put in the cable and tighten the 2x M3x10 bolts from them bottom so it sits in tight.
2. Put the M3 nuts into the designated spot in the T-nuts.
3. Drop the T-Nuts in the aluminium extrusion and screw the cable mount to it.
4. Plug the other end of the cable into your printer.

Have fun printing!