Wires guides for Palette 3 Pro

This simple part permits the wires to be parallel to each other and to prevent twisting of 2 wires together. This guide needs first to be mounted on the 2 upper rods (4 on each rod). At that location its function is to locate each wire roll at its proper place. The guides on the back rods need to be shifted a little bit vs the front rod.

On the lower front rod 4 additional guides need to be mounted. At this location their function is to receive the wire from the back rod. There is a hole in the guide for this function.

I printed those guide in black Materio3D PETG. You just need 24 No. 10-24x1 inch long screws. 

For the input entrance of the Palette 3 Pro use the following part:

https: //www.thingiverse.com/thing:5261015