January 20, 2026
Description
For a faster print I recommend using the Infill Hack by setting the top and bottom layers to zero, gyroid infill 25%. For best fit and durability use PETG filament.
Print Specifications
Specification | Value |
Estimated Print Time | 49 Minutes |
Filament Used | 11.9 g |
Layer Height | 0.20 mm |
Wall Thickness | 1 perimeters |
Infill Density | 30% |
Infill Pattern | Gyroid |
Top Layer | 0 |
Bottom Layer | 0 |
Supports Required | No |
Adaptive Layer Height | Disabled |
Settings Used
This Print: 0.40mm nozzle • 245°C Nozzle • 80°C Bed
Print Notes
Optimized for Ender 3 V2 with BLTouch bed leveling
Uses off-print purge line to prevent nozzle blobs
Exported from PrusaSlicer
⚠ Adjust temperatures +/-5C if experiencing adhesion or stringing issues
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MindCubby
