March 30, 2022
Description
This improved part cooler will blow air in an arc of 250deg around the nozzle (original: 75deg). The hotend quickchange function still works with the 20x16x12mm heater block. If you have mounted your heater block so the cartridge is on the other side, just mirror the .stl in your slicer.
I made this for the LH version of the toranado: https://www.thingiverse.com/thing:1246951 - check on your own if it works for the other versions!
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
Print like original
Category: 3D Printer Extruders
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
Dope-Johnny
