Tool Changer Hand Amputation Aid - Magnet Version

"Pre-Prosthetic" that uses a rotary locking coupling. 1/4 turn rotary locking collar uses magnets to maintain open/closed position.  Thermoform the base to fit onto a thermoplastic forearm cuff. 

• Requires three 5mm x 3mm magnets 

• Print settings: .2mm height

• No supports needed

• Pic of old version (in blue) is shown in use. 

Base Assembly:

1. Glue magnets to "Locking Ring" & "Female Base" (ensure correct magnet orientation)

2. Glue the base assembly together (see pic); ensure "Locking Ring" freely rotates 1/4 turn.

3. Mold thermoplastic splinting material as a cuff around residual limb

4. Heat up the perforated section of "Female Base" (hot water or a heat gun) and mold to the plastic cuff (see pic); use glue or more splinting material to fasten in place

Tool Assembly:  

Ball and socket Tool uses foam tubing (e.g. Rubazote)

1. Print "Tool - Screw" first

2. In your slicer, insert a pause for the "Tool - Foam Holder" print

   1. When printing has paused, place the pre-printed  "Tool Screw" onto the shaft.