K2 Series big spool holder for 2,5 / 3kg spools

Dieses Modell ist ein externer Filamenthalter mit Führung für den Creality K2, K2 Pro und K2 Plus, ideal für große und schwere 2,5–3 kg Filamentspulen. / This model is an external filament spool holder with guide for the Creality K2, K2 Pro and K2 Plus, ideal for large and heavy 2.5–3 kg filament spools.

Geeignet für 2,5 kg und 3 kg Spulen (auch kleinere möglich). 5 kg Spulen habe ich nicht getestet. / Supports 2.5 kg and 3 kg spools (smaller spools also possible). I have not tested 5 kg spools.

Druckhinweis: Bitte so drucken wie auf dem Bild abgebildet, mit mindestens 4 Seitenwänden und 25% Infill. / Printing note: Please print in the orientation shown in the picture, with at least 4 perimeters and 25% infill.

I ADDED A SUPPORT PILLAR FOR THE K2 PLUS! If you want one for the K2 Pro, or the K2 please do the following:

- 1. Print the spool holder and slide it over the metal part 
- 2. now take a tape measure and measure from the underside of the spool holder (not the round part) to the table/ ground where your printer sits. on the K2 PLUS this should be 38 cm. however, you can manipulate the middle part of the support pillar - it is 17cm in the K2 plus variant. if your K2 has (say) 25cm) you have to change the aspect ration of the part so that it is 3 cm shorter. ( i actually do not now if it is 35cm, its an example). OR you can tell me the number, and i will add the version for your printer.