Yolocam S3 Lens Cover

This is for the YoloLiv Yolocam S3, which does not come with a privacy cover. This design uses a compliant spring design inspired by LXO's 49mm lens cap, but clamps on the outside instead of the inside like traditional lens covers. 

The front face is .6 mm thick (3 layers) making it easy to modify it with a logo or design in prusa slicer that is .4 mm thick (2 layers). 

I had to use a blade and insert it between the body and the springs/clips to get them free. I tried a few different ways for this and that was the easiest.