February 15, 2026
Description
simply collar to hold a zip tie-antenna.
print, then open the collar carefully and place it on rollbar, insert the m3 screw in the thinner side (hole m3) and screw in the thick part (hole 2.6mm)... leave some room for the zip tie,insert the zip tie, then thigh the screw.
u need an M3x8mm screw and a 1.9/2 x 1mm zip tie, cut the zip tie locker and insert in the collar, then tight the screw.
easy, cheap, nice look.
License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
8
Naftausa
