Winter Whistle - Minnesota

Contains the phone numbers for the Monarca Rapid Response Helpline and the CAIR Minnesota Legal Support Helpline. 

My settings for my 3D printer are as follows:

Generic PLA Filament

15% infill

.2mm layer height

First color change at 0.8mm height

Second color change (back to first color if desired) at 5.8mm layer height

The whistles (assuming an ~$19 spool of PLA filament) cost less than 8 cents a piece.(4.13g
filament/1000kg/spool*$19=$.07847)

FOR ADDING TEXT TO THE BLANK MODEL - USE 0.5mm TEXT EMBOSS HEIGHT! THIS WAY IT WILL NOT EAT INTO THE WHISTLE PART OF THE WHISTLE!