Thermalright AXP90-X53 - 115X - Bracket Spacers

These spacers close the gap between the cooler bracket (CPU side) and the mainboard. Without them, there is risk in flexing/cracking the board if over tightened.

• Designed for a ASRock Rack 1151 ITX board, these may or may not be the right height for other boards.

• Design assumes the foam pads on the studs remain in place.

• Small lip built in to help with hole alignment in the mainboard.

• Allows for full tightening of the cooler bracket nuts, while maintaining enough of a gap for thermal paste distribution.

• Printed in fine layers.