cross tweezer

simple cross tweezers. Useful for soldering delicate parts, holding wires etc.

tough-version can be used when more force is required, normal version (less spring force) when handling delicate objects.

Instructions

1. print (no support/raft needed)
2. assemble as seen in the photo
3. profit

for good alignment it could be useful to drop a bit of glue on the clamp-part.

For Slic3r Users: using the default .5mm nozzle setting with a new slic3r version might cause delamination, overfill, etc. For me setting extrusion width to .499mm and the extrusion multiplier to 0.92 helped getting good results.

Category: Hand Tools