January 26, 2026
Description
A vertically mounted barbell storage for 3x3 squat racks with 1" holes.
Print as oriented. No supports needed. I printed with 6 walls and 20% infill for strength.
Don't print this in PLA. PLA will sag on a hot day in your garage and you'll have a bad time. PETG, ABS, ASA, or PBT are all good options.
Note on fit: This will fit REP, Fringe Sports, and other racks with metric sizing. They all use 50mm hole spacing rather than true 2" spacing (50.8mm) used by Rogue. For an ideal fit on Rogue racks, just scale the Y-axis by 1.6%.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
11
madmaxx890
