Modules for Prusa CORE One Side Storage

I made a couple of modules to fit the modular Core One side storage system by jonnieZG. Specifically, I have made the following modules:

• Front module for the Prusa brass brush, the 6 hex wrenches from the Core One kit, and the Noga deburring tool.

• Front module for this hex scraper (link) and two tweezers.

• Tray for the Bowden Speed Loader by MrFlippant (link). This tray attaches to a 7.8x11.9mm slot such as the one found in the original "Brush and Clippers" module.

Note that the "Brush and Clippers" module does not fit the Prusa brass brush, which is why I made my own module here. The Speedloader tray allowed me to recycle the slot this left available :)

Also note that it is not because I am sloppy that the Noga slot if offset from the center of the module. This is intended to provide sufficient clearance for the tool to not hit my precious build plates kept right next to it.

If you want to make your own modules, I have included a blank module in .step which is much easier to edit than the original .stl files. Enjoy!